No.20S024-02 4.3 Mechanical Specifications (*1) excluding the connectors 4.4 Environmental Specifications (*1) Please insure the camera is installed with appropriate heat dissipation to keep camera housing temperature (top plate) is less than 65 deg. C when camera using ambient temperature is exceeded 39 deg. C. If the camera has a mounted lens and a tripod with an aluminum plate, this could decrease camera housing temperature for heat dissipation. Taking these steps will maintain heat rating of electronic components of camera.
Upper side of camera Measuring point STC-MBS212CXP6 / STC-MCS212CXP6 Product Specifications and User’s Guide 13/50 Model Number STC-MBS212CXP6 STC-MCS212CXP6 Dimensions 28 (W) x 28 (H) x 40 (D) mm (*1) Optical Filter No Optical Filter Optical Center Accuracy Positional accuracy in Horizontal and Vertical directions: +/- 0.3 mm Rotational accuracy of Horizontal and Vertical: +/- 1.5 deg. Material Aluminum alloy (AC) Lens Mount (*2) C Mount Interface Connectors CXP Connector: BNC, 75 ohm IO Connector:
HR10A-7R-6PB (Hirose) or equivalent Camera Mounting M2 screw holes (Two on top, three on bottom plate) M4 screws holes (Two on top, four on bottom plate) Weight Approximately 52 g Model Number STC-MBS212CXP6 STC-MCS212CXP6 Operational Temperature / Humidity Minimum Environmental Temperature: 0 deg. C, Environmental Humidity: 20 to 85 %RH (No condensation) Maximum Environmental Temperature: +39 deg. C, Environmental Humidity: 20 to 85 %RH (No condensation) or housing temperature: not exceeded +65 deg. C Storage Temperature / Humidity Environmental Temperature: -20 to +75 deg. C, Environmental Humidity: 20 to 85 %RH (No condensation) Vibration 20 Hz to 200 Hz to 20 Hz (5 min.
/ cycle), acceleration 10 G, XYZ 3 directions, 30 min. each Shock Acceleration 38 G, half amplitude 6 ms, XYZ 3 directions, 3 times each KC EMS: EN61000-6-2, EMI: EN61000-6-4 RoHS RoHS Compliant