8-24 Seat system 8. Exteriors and Interiors 8.1.4.10 Removal and refitting of lumbar support/massage module controller Removal procedure Note: - The following is the removal and refitting of the left front seat lumbar support/massage module controller, which is the same as that of the right front side. 1. Remove the left front seat inner and outer trim panels (refer to 8.1.3.8 Removal and refitting of front power seat inner/outer trim panel ) 2. Disengage 4 fixing clips of the lumbar support/massage module controller, and take out the lumbar support/massage module controller ① . Refitting procedure The refitting procedure is performed in reverse order. VOYAH FREE