Chapter 1: SCARA Robots 1.1 eCobra 600 and 800 Robots - EC Document P/N: 13384-000 Rev. J Original EC DECLARATION OF INCORPORATION According to EC Directive 2006/42/EC, Annex II 1.B 1. Business Name & Address Omron Robotics and Safety Technologies, Inc. 4225 Hacienda Drive, Pleasanton, CA, 94588, USA 2. Name & Address of person authorized to compile technical documentation in EU Mr. J.J.P.W. Vogelaar, European Quality & Environment Manager, Zilverenberg 2, 5234 GM ‘s- Hertogenbosch, The Netherlands 3. Description and Identification of Partly Completed Machinery 4.
Essential Requirements of the Machinery Directive applied and fulfilled 1.1.1, 1.1.2, 1.1.3, 1.1.4, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.5.11, 1.6.1, 1.6.2, 1.6.3, 1.6.4, 1.7.1, 1.7.2, 1.7.3, 1.7.4 Relevant technical documentation is compiled in accordance with Annex VII, Part B of the EC Machinery Directive 2006/42/EC 2006/42/EC Machinery Directive - EN ISO 12100:2010, EN ISO 13849-1:2015, EN ISO 10218-1:2011, EN 60204-1:2018 2014/30/EU EMC Directive - EN61000-6-4:2007/A1:2011, EN 61000-6-2:2019 5.
Method of Transmission We undertake, in response to a reasoned request by national authorities, to supply relevant information on the partly completed machinery, in electronic form, to the market surveillance authorities within a reasonable period. Provision of this information shall be without prejudice to the intellectual property rights of Omron Robotics and Safety Technologies, Inc. 6.
Statement of Service for Partly Completed Machinery Partly completed machinery described in section 3 above must not be put into service until the final machinery, into which it is to be incorporated, has been declared in conformity with the provisions of the EC Machinery Directive 2006/42/EC, where appropriate. Signed and on behalf of: Place and date of issue: Omron Robotics and Safety Technologies, Inc. Pleasanton, California, USA; 19 May 2021 Signature: Name: Andrew Shruhan Function: Director of Electrical Engineering 1/1 18305-000 Rev Q Manufacturer's Declarations 7 Equipment Description Model number Robots:
One or more required with optional equipment Cobra / eCobra 600 570/577/594-xxxxx Cobra / eCobra 800 571/573/574/578/595-xxxxx Cobra eVario 600 575/588-xxxxx Cobra eVario 800 576/589-xxxxx Cobra / eCobra 800 Inverted 591/593/596/597-xxxxx Controller (One is required) Cobra eAIB 180-xxxxx Cobra iCS-ECAT 182-xxxxx Controller Option Smart Controller EX 200-xxxxx NJ Controller 3000-xxxxx Pendant Option T20 Pendant 10055-000