Ethernet Communication Module IFD9506 9.6 Returning to Default Settings You can easily return all the settings to default ones on the page after you have modified those settings several times. „ How to return to default settings Check “Factory Setting” and press (Y), all the settings in IFD9506 will return to default settings. Note: Returning all the settings in IFD9506 to default ones through RS-232 COM port can be done no matter IFD9506 is locked by the password or not. The entire process will take approximately 10 seconds, and please DO NOT switch off the power during this 10 seconds. To return to default settings, you can also press the “Reset” button for 2 seconds.
9.7 Monitor Table By setting up IFD9506, you will be able to read data in specific addresses on the network and store the data temporarily in IFD9506. This realizes fast data storage and retrieval. „ How to monitor master DVP-PLC Application Manual 34