Mass Dynamics Products The Smartlinx map 1 is controlled by the values of the indices of P762. By turning on an index (setting the value to one or more), you activate both the read and write blocks associated with that index. The table below shows which values in the read/write blocks are turned on by each P762 index. Appendix A 1.
For examples of the data maps before modification, see pages 55 and 57 7ML19981BH02 SmartLinx DeviceNet – INSTRUCTION MANUAL Page 53 Words Description Access Data Type 35 parameter SPA integer 36 parameter primary index integer 37 parameter secondary index integer 38 value integer 39 decimal place integer 40 format 0/1 41 read/write flag 0/1 Name of area P762 Point Value Read area turned On Write area turned on Status 1 1 Instrument status ------------------- Rate 2 1 Rate ------------------- Load 3 1 Load ------------------- Speed 4 1 Speed ------------------- Total 5 1 Total 1 ------------------- Total 2 Relay Status 6 1 Relay Status ------------------- DI Status 7 1 Discrete Input Status ------------------- SPA 8 1 Parameter Number Parameter Number Primary index Primary index Secondary index Secondary index Returned Value New Value Decimal Place Decimal Place Format Format Read/Write Read/ Write Command Control 9 1 ------------------- Command Control Multispan 10 1 ------------------- Multispan Selection PID 11 1 ------------------- PID 1 setpoint value PID 2 setpoint value Batch 12 1 ------------------- Batch Setpoint Value