EN cover of the light board, then remove the protective cover of the light board and unplug the wiring connected to the light board. Finally, uninstall the two rivets from 2. Install the light source the light board, and then remove the light board. Place the light board on the base, and use two new rivets to fix the light board onto the base. Connect the wiring, then install the protective cover on the light board with three new rivets to fix the cover onto the base. Warning: Before replacing the LED light board, cut off the electricity to prevent an electric shock. This replacement should only be carried out by a qualified electrician.
Light Board Press down the plastic tip of the rivet Light Board Rivet Protective Cover cap about 3 mm, then remove the rivet bracket to completely remove the rivet. Protective Cover Rivet Press down the plastic tip of the rivet cap about 3 mm, then remove the rivet bracket to completely remove the rivet. 16