HP Color LaserJet 8500 MFP printer—separating the printer from the frame 1 Remove two screws (callout 1) from the attachment cover on the left side of the printer to release the attachment cover. 2 Remove two screws (callout 2) from the attachment bracket. 1 2 2 2 Figure 77. Attachment bracket, HP Color LaserJet 8550 MFP printer 3 On each side at the bottom of the rack, rotate the locking pins (callout 3) until they slide out of the holes. 23 Figure 78. Locking pins 4 Roll the printer off of the rack. EN Doors and covers 227