Right assemblies Gain access to the following assemblies from the right side of the printer: tray 1 pick-up roller density sensor paper pick-up assembly registration roller assembly tray 1 pick-up assembly paper photo sensors Tray 1 Tray 1 is part of the right upper door. Take the tray off and save it if you are replacing the whole assembly. The new assembly does not include the tray. 1 Open the tray out about 45-degrees. 21 Figure 112. Tray 1 2 Open the extender all the way out. 3 Grasp both sides and bend towards the middle. Pull the left side of the tray out first, then pull the right side of the tray out. 4 Unplug one connector on the right side (callout 1).
EN Right assemblies 261