Safety switch assembly 1 Remove the front cover, the back cover, and the carriage assembly. 2 Press the two tabs on the sides of the safety switch assembly cover (callout 1) to release it from the frame and lift the cover away from the assembly. 3 Disconnect two cables (callout 2) from the safety switch assembly. 4 Press the tabs on the bottom of the safety switch assembly (one tab on each side—callout 3) to release it from the frame and lift the assembly away from the product. 1 2 2 2 23 Figure 207. Safety switch assembly removal EN 3,000-sheet stapler/stacker and 3,000-sheet stacker 357