Changing the bulbs Before changing the bulbs, always follow the instructions and warnings in the chapter entitled ”Safety instructions”! NOTE: If the light does not function, check whether the bulbs have been inserted correctly. The description of changing the bulbs applies to several appliance models. Defective bulbs should be replaced immediately to avoid overloading the remaining bulbs. NOTE: Observe the warranty regulations in the enclosed service booklet. Always isolate the extractor hood by pulling out the mains plug or switching off the fuse! Changing the halogen bulbs Halogen bulbs become very hot during operation.
Even some time after the appliance has been switched off, there is still a risk of burns! Before changing the halogen bulbs, ensure that they have cooled down fully. 1. Carefully remove the bulb ring with a suitable tool. NOTE: Defective fluorescent tubes may be replaced by the manufacturer, his customer service, or a similarly qualified person only. 2. Replace the defective bulb with a new one of the same type and equivalent power (see rating plate). NOTE: When inserting halogen bulbs, do not touch the glass tube. Therefore use a clean cloth when inserting the bulb. 3. Reinsert the bulb cover. 4. Restore the power supply by inserting the mains plug or switching on the fuse. 13