Chapter 2 0BProgramming 6. Analog input/output module (6 channels) AH06XA-5A x 1 06XA RUN ERROR V0 V0 R0 V1 V1 AI R1 V2 V2 R2 V3 V3 COM AO V0 I0 R3 I1 ZP V1 1 0V, 2 0mA 1 0V,0 /4 ~20 mA UP FE 2.1.2 Software The software needed in the example is as follows. ISPSoft version 2.0 or above COMMGR version 1.0 or above 2.1.3 Tools and Materials The tools and the materials need in the example are as follows.
A personal computer in which the software mentioned above is installed A 100~240 VAC and 50/60 Hz power supply socket A 24 VDC power supply A cable A screwdriver An USB cable or a network cable (If users want to connect the Ethernet port or the COM port (RS-232/RS-485) on the CPU module to the computer, they can refer to section 2.3.2 in ISPSoft User Manual for more information. If users want to know more about installing the USB driver, they can refer to appendix A in AH500 Operation Manual.) If necessary, users can prepare the accessories such as a switch and a bulb (to simulate the activity of the external equipment).
2.2 Installation 2.2.1 Installing Modules Please install the modules on the main backplane, as illustrated below. Connect the module to the connector on the backplane, make sure that the module is installed on the backplane properly, and tighen the the screw. 2-3