Configuring Application Hosting on the Management Port SUMMARY STEPS 1. enable 2. configure terminal 3. interface gigabitethernet0/0 4. vrf forwarding vrf-name 5. ip address ip-address mask 6. exit 7. app-hosting appid name 8. app-vnic management guest-interface network-interface 9. end DETAILED STEPS Procedure Application Hosting Configuring Application Hosting on the Management Port Command or Action Purpose Device(config-app-hosting-mgmt-gateway)# guest-ipaddress 172.19.0.24 netmask 255.255.255.0 Step 7 exit Example: Device(config-app-hosting-mgmt-gateway)# exit Exits application-hosting management-gateway configuration mode and returns to application-hosting configuration mode.
Step 8 app-default-gateway ip-address guest-interface network-interface Example: Device(config-app-hosting)# app-default-gateway 172.19.0.23 guest-interface 0 Configures the default management gateway. Step 9 end Example: Device(config-app-hosting)# end Exits application-hosting configuration mode and returns to privileged EXEC mode. Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Enters global configuration mode. Application Hosting 23