I/M Readiness This function checks whether or not the various emission-related systems on the vehicle are operating properly, and are ready for I/M testing. It can also check the monitor running status and to confirm if the repair of a car fault has been performed correctly. Live Data This function displays the real-time live data and parameters from the vehicle’s ECU. On-Board Monitor This function displays the test results for emission-related powertrain components and systems that are not continuously monitored. Component Test This function helps send control commands to the vehicle's ECU as a way to test and operate the system parts and components.
Vehicle Information This function displays a list of information (provided by the vehicle manufacturer) from the vehicle’s ECU. The information may include: • VIN. • Calibration ID (CID). • Calibration Verification Number (CVN). • In-use Performance Tracking for Spark Ignition Engine (IUPR) • ECU Name Vehicle Status This function displays the status of the vehicle, including Engine, Transmission, Codes Found, MIL Status, Monitors and Protocol. 4.3.2 Diagnostic Feedback The ArtiDiag500/ArtiDiag600 allows you to instantly send diagnostic feedback (with logs of diagnostic data automatically attached) while you are encountering a software problem with the diagnostics operations.
To send diagnostic feedback: 1. Tap the icon located at the top right corner of any screen with this icon. 21