AS-4000 User’s Guide Basic Operations F Check the Substrate No. and Print Info., and then press Print . Print the color measurement chart, measure the colors, and then create an ICC profile. While printing the chart or measuring colors, the status of the press is displayed at the top of the touch panel. Note: In the following situations, set the details from Advanced . ❏ If graininess is noticeable when viewing print results in a bright location: You may be able to improve the graininess by reducing the black level in Black Level Ratio or increasing the starting point for black level in Black Starting Point .
❏ If there is a large change in colors when viewing print results under different light sources: You may be able to improve changes in color by increasing the black level in Black Level Ratio or decreasing the starting point for black level in Black Starting Point . ❏ If color reproduction accuracy or gradation are poor when printing gradations and so on: This may be resolved by changing the number of grids in the Table Size . ❏ If color gradation is poor in color measurement results printed on substrates with large surface irregularities: Set Smoothing Level to On . This may improve variations in color measurement results.
However, when Smoothing Level is set to On , the color reproduction accuracy may decline even after group-adjusting spot colors or even if process colors are used. G Check that the ICC profile has been created. The name of the file you created is displayed in the ICC Profile column in the list. ICC profiles are automatically named using the following rules. L4533 UCP_0000 B101 CMYK.icc a b c 27 Item Explanation a Model Name b Substrate No. c Print Info. name