AS-4000 User’s Guide Checking Colors B Press Settings from Check Job Spot Color Accuracy, and then set After Printing as the time to execute Check Spot Color Accuracy. Change the other settings as necessary. C Perform printing from Epson Edge Print Label. When the test print is complete, the chart will be printed, and color measurement and determination will be performed. D Check the results of the test print. Also, if you have made settings to display the check results for Check Job Spot Color Accuracy, you can confirm the results of the accuracy check. E Select the job you used for the test print, and then press Print Settings .
On the Other Settings tab, clear Check Job Spot Color Accuracy, and then start printing the actual job. Checking the Results of the Before Printing Check When you have finished performing color measurements for the chart, check the results for color accuracy. This section explains how to check when the results are displayed regardless of whether or not there is a problem, assuming that Display Check Results was set to Enable beforehand. You can cancel the job if there are colors that exceed the standard values. 62