3. HARDWARE SETUP 5) Onboard Audio Setting (available on software audio model only) The onboard audio CODEC may be enabled or disabled using all of these jump- ers. Disable the onboard audio CODEC if you are using a primary AMR on the AMR slot (see AMR Slot later in this section). Setting AUDIO CODEC Enable [1-2] [1-2] [1-2] [1-2] (Default) Disable [2-3] [2-3] [2-3] [2-3] JP4–JP7 JP4 1 1 JP4 JP5 JP6 JP5 JP6 JP7 Enable Onboard Audio CODEC (Default) JP7 Disable Onboard Audio CODEC Motherboard Settings 3. H/W SETUP P3C-LS/L/S Audio CODEC Setting 6) SCSI Controller Setting (JP17) (available on SCSI models only) This jumper lets you disable or enable the SCSI controller function.
Set to Disable if you do not want to use the onboard SCSI controller. The default setting is En- able , which lets you use the onboard SCSI controller. Setting JP17 Enable [2-3] (default) Disable [1-2] 1 2 3 1 2 3 JP17 Disable Enable (Default) P3C-LS/L/S SCSI Controller Setting 20 ASUS P3C-L / P3C-S / P3C-LS User’s Manual P3C-LS / L / S JP4=S JP5=A JP6=A JP7=A P3C-LS / L / S