Installation to Startup Installation to Startup Opening a new project Opening a new project Device type settings Device type settings Creating a program Creating a program 1. Installation procedure of CX-Programmer Before installation of CX-Programmer, you must: • terminate all Windows programs, and • uninstall older version of CX-Programmer and peripheral tools (such as CX-Protocol) if they are already installed. • Installation takes about 5 to 20 minutes depending on your PC. (5 minutes for a PC with CPU: Celeron2.2GHz, main memory: 512MB, and CD-ROM drive:
48x) • To change/modify/delete CX-Programmer after installation, refer to the PDF manual “CX- Programmer Operation Manual” , Chapter 2 ”Installation and Uninstallation”. Before installation of CX-Programmer, you must: • terminate all Windows programs, and • uninstall older version of CX-Programmer and peripheral tools (such as CX-Protocol) if they are already installed. • Installation takes about 5 to 20 minutes depending on your PC. (5 minutes for a PC with CPU: Celeron2.2GHz, main memory: 512MB, and CD-ROM drive: 48x) • To change/modify/delete CX-Programmer after installation, refer to the PDF manual “CX- Programmer Operation Manual” , Chapter 2 ”Installation and Uninstallation”. 1-1.
Installing CX-Programmer Insert the CX-Programmer installation disk (CD-ROM) to your PC’s CD-ROM drive. [Choose Setup Language] dialog box is displayed. Default language of the OS on your PC is automatically selected. Check if the language is appropriate, then click [OK]. Click [OK]. CX-Programmer splash screen is displayed, then CX-Programmer installation is started.