EXPLANATION OF COMPONENTS OPERATION OPERATION WITH COLD AIR TO FACE AND WARM AIR TO FEET To operate with cold air blowing to the face and warm air blow- ing to the feet, set as follows. 1. Press fan switch (2) and adjust the air flow. When doing this, check that temperature setting (a) and air flow (b) are displayed on the display monitor. 2. Press vent selector switch (4) and set the vent display on the display monitor to the display shown in the diagram on the right. 3. Turn air conditioner switch (8) ON. When this is done, the lamp above the air conditioner switch lights up. 3-42