Safety 2.2 General precautions ROPS (Roll Over Protective Structure) ! The roll-over protection system (ROPS) protects the opera- tor and absorbs load and impact energy, if the machine should roll over. ! The ROPS is a fixed component of the cab. The machine must not be operated without this roll-over protection sys- tem. ! The ROPS meets the regulations of all member states of the EU. If, however, the ROPS is modified, damaged, or repaired without permission, its stability is impaired. In this case, the ROPS must be replaced, since its correct function can no longer be guaranteed. ! The ROPS can only provide maximum protection, if the driver wears the safety belt correctly.
For this reason, the safety belt is to be worn when the machine is in operation. Attachment for protection against falling objects (FOPS) When you work on a site where there is danger of falling rocks or other objects, the machines must be equipped with a FOPS. If the FOPS is modified without permission or damaged, its stabil- ity is impaired. In this case, the FOPS must be replaced, since its correct function can no longer be guaranteed. Precautions for attachments, options ! When installing optional parts or attachments, there may be problems with safety or legal restrictions. Therefore contact your KOMATSU distributor for advice. !
Any injuries, accidents, or product failures resulting from the use of unauthorized attachments or parts will not be the responsibility of KOMATSU. ! When installing and using optional attachments, read the instruction manual for the attachment, and the general infor- mation related to attachments in this manual. Unauthorized modification If this machine is modified without permission from KOMATSU, there is danger that problems may occur with safety and that this may lead to serious personal injury. Modifications may have an adverse effect on items such as machine strength and visibility. Before making a modification, consult your KOMATSU distribu- tor.
KOMATSU will not be responsible for any injuries, accidents, product failures or other property damages resulting from modifi- cations made without authorization from KOMATSU. WA470-6H – VEAM946100 2-15