Page 9 MAINTENANCE SECTION 2 CHECK BEFORE STARTING See the section on CHECK BEFORE STARTING aforementioned. EVERY 50 HOURS SERVICE Loosen valve (I) on the bottom of the tank so that the precipitation and mixed water will be dramed in accompaniment with fuel FUEL TANK TIRE Measure !he tire pressure before operations when the tires are cool. (Refer to HANDLING TIRES) Maintenance for every 50 hours should be carried ou! at the same time. EVERY a00 HOURS SERVICE HYDRAULIC TANK Lower the bucket horizontally to the ground and s:op ihe engine Wait for 5 minutes, then check sight gaiige (G).
the oil should be visible in sight gauge (G) The type of lubricant used depends on the ambient temperature Select according to the table “FUEL COOLANT AND LUBRICANTS”. a Add engine 011 from oil filler (F). if necessary. WARNING! When removing the cap, turn it slowly lo relieve inner pressure.