UNDERCARRIAGE / Center Joint CAUTION: Spindle (2) weight: 22 kg (50 lb) Body (7) weight: 29 kg (60 lb) IMPORTANT: Apply grease to the sliding surface of dust seal (3) on spindle (2) and inner surfaces of oil seal (6) and bushing (5). 4. Place spindle (2) on a workbench with its upside down. Install eyebolt (M12, Pitch 1.75 mm) into the bolt (12) holes (2 places) on body (7). Hoist and place body (7) while aligning the matching mark with that of spindle (2). 5. Tap the circumference of body (7) evenly by using a plastic hammer and insert body (7) into spindle (2). IMPORTANT: Install ring (8) with the chamfered edge facing to the inner surface of body (7). 6. Install ring (8) to body (7).
IMPORTANT: Install retaining ring (9) with its chamfered edge facing to the ring (8) side. 7. Install retaining ring (9) to spindle (2). 8. Install O-ring (10) to body (7). Install cover (11) to body (7) with bolts (12) (4 used). : 19 mm : 88 N m (9 kgf m, 65 Ibf ft) W3-3-9