Safety Read Safety in Machine Operator’s Manual Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. Read the general safety operating precautions in your machine operator’s manual. Never lubricate, service or adjust the machine or attachment while it is moving. Keep safety devices in place and in working condition. Keep hardware tight. Operating Safety Read the machine and attachment operator’s manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the machine and disengage the controls quickly.
Keep hands, feet, clothing, jewelry, and long hair away from any moving parts, to prevent them from getting caught. Lower any attachment completely to the ground or to an existing attachment mechanical stop before servicing the attachment. Disengage all power and stop the engine. Lock park brake and remove the key. Let machine cool. This attachment is intended for use in property maintenance applications. Do not use for use other than intended by the manufacturer. Do not modify machine or safety devices. Unauthorized modifications to the machine or attachment may impair its function and safety. Disconnect the negative battery cable(s) before making any repairs.
Do not let children or an untrained person operate machine. Before servicing machine or attachment, carefully release pressure from any components with stored energy, such as hydraulic components and springs. Make any necessary adjustments before you operate. Never attempt to make any adjustments while the engine is running, unless it is recommended in adjustment procedure. Release hydraulic pressure by lowering attachment or cutting units to the ground or to a mechanical stop and move hydraulic control levers. Look behind machine before you back up. Back up carefully. Securely support any machine or attachment elements that must be raised for service work.
Use jack stands or lock service latches to support components when needed. Never carry passengers, especially children, on machine or attachment. Riders are subject to injury such as being struck by foreign objects and being thrown off. Riders may also obstruct the operator’s view, resulting in the machine being operated in an unsafe manner. Never run engine unless park brake is locked. Keep all parts in good condition and properly installed. Fix damage immediately. Replace worn or broken parts. Replace all worn or damaged safety and instruction decals. Disengage any power to the attachment when the machine is transported or not in use.
Never exceed 15 mph when loaded spreader is attached to vehicle. Braking distances may be increased and handling characteristics may be impaired at speeds above 15 mph. Check all hardware at frequent intervals to be sure the equipment is in safe working condition. Do not modify machine or safety devices. Unauthorized modifications to the machine or attachment may impair its function and safety. Never use wet materials or materials with foreign debris in the spreader. This unit is designed to spread dry, clean, free-flowing material. Never leave material in hopper when not in use. Weight of mounted machines, including their loads, can influence vehicle maneuverability.
Refer to vehicle OM for ballasting. Practice Safe Maintenance Only qualified, trained adults should service this machine. Understand service procedure before doing work. Keep area clean and dry. 5 LP69910 (12/07/2020) 3 CU FT GATOR FERTILIZER SPREADER