Installation Spreader Assembly 3. Plug the spreader harness into the chassis harness 1. Connect hitch mount (A) to the spreader using four 1/2 (C). Secure the harness to the hitch using the harness clips (D). in. x 1- 1/2 in. flange bolts (B). B A 2. For use with 835/865 Gator, remove CAN termination plug (C) from spreader harness and replace with receptacle dust cap (D). Installing Spreader 1. To aid in assembly, add grease to the slots. NOTE: It is recommended that two people lift the spreader for this installation. 2. Side receiver arms (A) into slots (B) until it clicks to lock into place. Be sure that the hitch latches securely.
B A 8 LP69910 (12/07/2020) 3 CU FT GATOR FERTILIZER SPREADER C D