INSTRUMENTS AND CONTROLS PEDALS AND LEVERS 1. ACCELERATOR PEDAL 2. BRAKE PEDALS speed and output. The engine speed The right brake pedal operates can be freely controlled between the wheel brakes, and is used for low idling and full speed. normal braking. A On hills, use the right brake pedal or use the left pedal with the transmission cut-off selec- tor switch put in OFF. This pedal controls the engine Right brake pedal Left brake pedal The left brake pedal operates the wheel brakes, and if the transmis- sion cut-off selector switch is at ON, it also returns the transmission to neutral.
If the transmission cut-off selec- tor switch is at OFF, the left brake pedal acts in the same way as the right brake pedal. A Do not use the brake pedals repeatedly unless necessary. A Do not use the brake pedals as footrests. Use them only when applying the brakes. * When the accelerator is being used for operating the work equipment, always use the left brake pedal to slow or stop the machine after putting the trans- mission cut-off selector switch in ON. - 24 - ww -02022