CHECK BEFORE STARTING d. CHECK OIL LEVEL AND REFILL IN ENGINE OIL PAN A Do not remove the cap while cooling water is hot. Hot water may spout out. Before removing radiator cap, turn cap slowly to relieve inner pressure. 1. Open the inspection ‘window at t When checking the oil level, park the machine on a level surface, stop the engine and wait for 15 minutes before checking. the rear left side of the machine. 2. Use dipstick (G) to check the oil level. 3. The oil level should be between mark L and H, if necessary, add oil at oil filler (F). f The type of lubricant used depends on the ambient tempera- ture. Select according to the table “FUEL, COOLANT AND LUBRICANTS”.
+ After checking, be sure to tighten the handle of (G) and (F). - 40 - W-04277