CHECK BEFORE STARTING i. CHECK AND REFILL OF OIL IN BRAKE OIL TANK i. CHECK FOR SEDIMENT AND WATER IN THE WATER SEPARATOR Check using sight gauge (I) of the brake oil tank on the left side of the machine to check that the oil level is between the MAX and MIN marks. If the oil level is low, open the cover at the top of the platform, then open cap (2) and add engine oil. * The type of lubricant used de- pends on the ambient tempera- ture. Select according to the table “FUEL, COOLANT AND LUBRICANTS”. A Never use the vegetable oil. The water separator separates water mixed in the fuel. If float (2) is at or above red line (I), drain the water.
For the draining procedure, see section “WHEN REQUIRED”. * Even if a water separator is installed, be sure to check the fuel tank to remove water and sediment in the fuel. WW-02036 - 43 -