GENERAL / Component Specifications CYLINDER (MONO BOOM MACHINE) Boom Arm Rod Diameter......................................... 100 mm (3’9”) 115 mm (4’5”) Cylinder Bore.......................................... 145 mm (5’7”) 170 mm (6’7”) Stroke..................................................... 1520 mm (4’11”) 1740 mm (5’8”) Fully Retracted Length ........................... 2145 mm (7’0”) 2425 mm (7’11”) Plating Thickness................................... 30 µ m (1.18 µ m) 30 µ m (1.18 µ m) Bucket Rod Diameter......................................... 95 mm (3’7”) Cylinder Bore..........................................
140 mm (5’5”) Stroke..................................................... 1250 mm (4’1”) Fully Retracted Length ........................... 1818 mm (5’11”) Plating Thickness................................... 30 µ m (1.18 µ m) CYLINDER (2-PIECE BOOM MACHINE) Boom Arm Rod Diameter......................................... 100 mm (3’9”) 115 mm (4’5”) Cylinder Bore.......................................... 145 mm (5’7”) 170 mm (6’7”) Stroke..................................................... 1520 mm (4’11”) 1740 mm (5’8”) Fully Retracted Length ........................... 2145 mm (7’0”) 2425 mm (7’11”) Plating Thickness...................................
30 µ m (1.18 µ m) 30 µ m (1.18 µ m) Bucket Positioning Rod Diameter......................................... 95 mm (3’7”) 110 mm (4’3”) Cylinder Bore.......................................... 140 mm (5’5”) 170 mm (6’7”) Stroke..................................................... 1250 mm (4’1”) 1498 mm (4’11”) Fully Retracted Length ........................... 1818 mm (5’11”) 2138 mm (7’0”) Plating Thickness................................... 30 µ m (1.18 µ m) 30 µ m (1.18 µ m) HOSE RUPTURE VALVE Relief Set Pressure ................................ 39.2 MPa (400 kgf/cm 2 , 5700 psi) T1-3-7