. OPERATION EXPLANATION OF COMPONENTS STARTING SWITCH OFF Position is running. ON position In this position, electric current flows in the charging and lamp circuits. running. 3 - 13 This switch (1) is us ed to start or stop the e At this position, the s tarting switch key can be inserted o r removed. When the switch is turned to this position, are turned off and th Do not the starting s wtich key at the OFF po sition while the engine Keep the starting sw itch key at the ON positi on while th e engine is START position This is the position t o start the engine. Hold t he key at t his position while cranking the e ngine. Release the key immediate ly after t he engine has been sta rted.
The key will return to ON po sition when released. HEAT position (Gau ge panel specification) Turn the starting sw itch key to the HEAT po sition whe n starting in cold weather. If the key is held a t the HEAT position, the electrical heater is is heated and the glow signal lights up or glows red. If the glow signal flashes or glows red , release the key immediately. so turn it When the key is released, it will return to OFF, immediately to the S TART position to start t he engine.