Appendix F Station Select Protection Station Select Protection prevents accidental switching between control stations on multi-stationed boats. If turned on, a change of control stations requires that control head buttons be pressed in a specific sequence - SELECT, SELECT, NEUTRAL, SELECT to change stations. The menu options are: Station Select Protection Off (N) (Default Setting). Station Select Protection On (Y). NOTE: If the status of Station Protection is in question, it may be checked through the i5601E Digital Display. Sequence:
“Main Menu - Calibration,” “Calibration,” “User Settings.” “Station Protect” is the last option under “User Settings.” OR try to set the second station - if Station Protection is on (Y) Station Select will not engage. Operation To change stations this is the button sequence: Go to the station you wish to make active. Press the Select button. Press the Select button again. Press the Neutral or ‘N’ button. Press the Select button. The station will go active (green light on solid) if the handles are matched with the originally active station. If the green light flashes , match the handles with the originally active station and the green light will go solid. Warning:
Until the green light is on solid, the original active station retains controls of the boat. Electronic Control System: Operation Manual for BY Series Engines with Unlimited Controls Page 26 © Yanmar 2008