. OPERATION EXPLANATION OF COMPONENTS BRAKE OIL TEMPERATURE CAUTION LAMP This lamp (1) lights up to warn the operator that the brake oil temperature has risen. light up. 3 - 18 During checks befor e starting (when the starting sw itch is turne d to the ON position but t he engine is not started), this m onitor does not During operation (en gine running) y-duty operations or when traveling long In continuous heav ng distances downhill w here the brake is used frequen tly, the brake oil temperature becom es high. The brake oil temp erature caution lamp and central w sounds intermittently At the same time, t OVERHEAT", so tak 1. Release the acc 2.
Avoid using the 1) Do not keep 2) Set the trans elerator pedal and move the g earshift leve r down one range to redu ce the t ravel speed. the brake pedal depressed co ntinuously; use the brake only intermi mission cut-off switch to the ON position whe n carrying out operatio If use of the brake is reduced for a short time in the way recommended above, the brake oi l temperature will go d own and the caution lam p will go out. TORQUE CONVERTER OIL TEMPERATURE CAUTI ON LAMP This lamp (2) light s up to warn the operator that the torque ature has risen.
converter oil temper During checks befor e starting (when the starting sw itch is turne d to the ON position but t he engine is not started), this m onitor does not light up. During operation (en gine running) er oil temperature rises, the torque converter on lamp only will light up. e rises further, the central warning lamp will m buzzer will sound intermittently. If the torque convert orque converter oil temperature cauti rning lamp will ntly. If the oil temperatur light up and the alar m buzzer will sound intermitte At the same time, "E 02" is displayed on the top line of the character display and "TC OV ERHEAT" is displayed on t he bottom li ne.
Stop the machine an d run the engine under no load at a mid-range speed until the lamp goes out.