Child safety 038 Installation 1 1. Push the head restraint behind the child The ISOFIX retaining ring on the rear seat back can only be used for ISOFIX systems. Do not connect the fastening belt, object or child seat other than ISO FIX one or any other to the retain ing rings. Any other ropes (for example, the fastening rope for luggage) shall not occupy the retaining loop, ex cept that only one top fastening rope may be connected to the rear retaining loop of the back of the rear seat. WARNING seat slightly upward. 2.
Pass the top tether through the head restraint, or place the top tether on both sides of the head restraint according to the structure of the child seat, and then pull the top tether rearward to the rear seat back. 3. Press the ISOFIX child seat onto the retaining ring at the front of the seat until the child seat engages audibly. 4. Draw two sides of child seat to check whether the child seat is installed firmly. 5. Fasten top fastening rope ISOFIX retaining ring (The position of the arrow shown in the figure)and top fastening rope hook on rear seat back. 6. Tighten the top fastening rope so that the child seat is close to the rear-row seat back.