. SAFETY SAFETY MACHINE OPERATION low the slope, 2 - 23 When travel up slopes, set the operator 's cab facing uphill, when travel down slopes , set the operator's cab facing downhill. Alway s check the firmness of the ground under the front of the machine When traveling up a steep slope, exten d the work e quipm the front to im prove the balance, ke ep the work approximately groun travel at low sp When travelin travel lever clos e to the neutral position, and travel a t low s Always travel s traight up or down a slo pe.
Traveling at an or across the s Do not turn on to a flat place t lope is extremely dange slopes or travel across s o change the position of on to the slope Travel on gras speed. Even machine may s If the engine s move the contr ol levers immediately to the neutral positio start the engin OPERATIONS ON SLOPES When working on slopes, there is a haz ard that the mach ine may lose its balance and turn over when the swing or work equipm ent are operated. This m ay lead to s erious injury or property damag e, so always provide a stable place when car rying out these operati ons, and operate c Do not swing t downhill side he work equipment fro when the bucket is lo m the uphill side aded.
This operat dangerous, an If the machine a platform that d may cause the machin has to be used on a slo will keep the machine a e to tip over pe, pile the s horizontal