2-78 CAB AND FRAME CAB MOUNTING Front Mounting N2A0128E Legend A. Non-tilt cab 1. Cab mounting bracket fixing bolt B. Tilt cab (wide) 2. Cab mounting lever assembly C. Tilt cab (narrow) Removal For RH side, remove the 4 fixing bolts. The nut side is classified into 2 types, weld and plate, depending on models. 1. Cab assembly Refer to “Removal and Installation of Cab As- sembly” in this Section. 2. Anchor bolt (Tilt cab model) For LH side, remove the 2 fixing bolts from the upper and 2 fixing bolts from the side. The nut side is classified into 2 types, weld and plate, depending on models, similarly to RH side. 4.
Anchor arm Loosen the anchor bolt, remove the adjusting bolt, and then remove the anchor bolt. 3. Front cab mounting bracket Remove the snap ring in the end of torsion bar. 5. Cab mounting lever assembly