CAB AND FRAME 2-81 Rear Mounting (Model with Rubber Bush- ing except Wide Cab Model) Installation For installation, reverse the removal procedure taking the following points into consideration. 1. Tighten the cab mounting bracket to the specified torque. Removal 1. Tilt-up the cab. 2. Cab rear mounting bracket (1) Remove the bolt and nut. 3. Cab mounting bracket (3) Tighten: Cab mounting bracket to 81 ± 7.8 N m (8.3 ± 0.8 kg m/ 59.7 ± 5.8 lb ft) Remove the cover (4) and remove the installing bolts. (Independent: 5 bolts, Rigid: 4 bolts) 4. Rubber bushing assembly (2) 2. Tighten the cab rear mounting bracket to the spec- ified torque. Tighten:
Cab rear mounting bracket to 127 ± 13 N m (13.0 ± 1.3 kg m/93.7 ± 9.6 lb ft) 3. Set the tilt of cab rear mounting bracket to ± 2 ° or less. N2A0132E Fixing Torque N2A0133E