37 WEBM1000 Product Information Section (D6T LGP (OEM)) Identification Information 29 Engine Power for additional engine (kW) (if equipped) Typical operating weight of machine for European market (kg) Year of construction Machine Type For machines that are compliant to “1998/37/EC”, the following information is stamped onto the “CE” plate. Illustration 29 31 The Information Plate is on the engine valve cover. The following information is stamped on the Information Plate: engine maximum altitude, horsepower, high idle, full load rpm, fuel settings and other information. The serial number plate for the dozer blade is attached to the back side of the dozer, if equipped.
Certification CE Mark Illustration 31 For quick reference, record this information in the spaces that are provided below. This plate is positioned on the PIN plate on the left side of the front frame. For machines that are compliant to “2006/42/EC”, the following information is stamped onto the “CE” plate. Engine Power of primary engine (kW) Typical operating weight of machine for European market (kg) 30 Year Structure certification (ROPS) m WARNING Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification.
Consult your Cat dealer to determine this structure's limitations without voiding its certification. Illustration 30 CE plate For quick reference, record this information in the spaces that are provided below. The protective structure certification is located on the outside of the left post. Engine Power of primary engine (kW)