12. OPERATION 03 SEAT ANGLE 1. When lever 0 is pulled up, it is possible to adjust the angle of the seat front. (5 stages) 1. To raise the seat front, keep the lever pulled up and apply your weight to the seat backrest. 2. To lower the seat front, keep the lever pulled up and apply your weight to the seat front. 2. When lever 0 is pulled up, it is possible to adjust the angle of the seat back. (5 stages) 1. To raise the seat back, keep the lever pulled up and stand up slightly. 2. To lower the seat back, keep the lever pulled up and apply your weight to the seat back. @ ADJUSTING VERTICAL HEIGHT OF SEAT Pull up levers 0 and 0 in turn and adjust the angle.
After adjusting, release the levers and lock them. (Vertical adjustment amount: 5 stages, 60 mm) 0 SEAT ADJUSTING DIRECTION Move lever 8 back to release the lock, then turn the seat to the right by hand. It is possible to change the direction of the seat to the 15” position. After changing the angle of the seat, return the lever se- curely and lock it in position. 0 Adjusting the seat angle to the right is done to make it ea- sier to carry out ripper operations or scraper towing oper- ations. 2-42