1.2. Safety Precautions ! Place allowing sufficient ventilation Jobs such as engine running part welding and polishing the paint with sandpaper should be done in a well-ventilated place Failure to Observe Very dangerous for human body due to the possibility of inhaling poisonous gas or dust ! Sufficient wide and flat place The floor space of the service shop for inspection and maintenance should be sufficiently wide and flat without any holes. Failure to observe An accident such as a violent fall may be caused. ! Clean orderly arranged place No dust mud 0il or parts should be left on the floor surface. Failure to Observe An unexpected accident may be caused !
Bright safety illuminated place The working place should be illuminated sufficiently and safety For a job in a dark place where it is difficult to see use a portable safety lamp. The bulb should be covered with a wire cage for protection. Failure to observe The bulb may be broken accidentally causing ignition of leaking oil. ! Place equipped with a fire extinguisher Keep a first aid kit and fire extinguisher c1ose at hand in preparation for fire emergencies 2