AWARNING: Failure to follow these safety precautions may lead to a serious accident. 6. GENERAL PRECAUTIONS UNAUTHORIZED MODIFICATION l Any modification made without authorization from Komatsu can create hazards. l Before making a modification, consult your Komatsu distributor. Komatsu will not be re- sponsible for any injury or damage caused by any unauthorized modification. - STANDING UP FROM THE SEAT l ALWAYS move the SAFETY LEVER to the LOCK position before standing up from the operator’s seat. If you don’t, you could unintentionally hit the control levers, resulting in sudden machine movement and the possibility of damage, injury or death.
l Before leaving your machine, lower the blade to the ground, move the SAFETY LEVER to LOCK, and stop the engine. Machine posture -+ See “PARKING MACHINE”. Locking MOUNTING AND DISMOUNTING NEVER jump on or off the machine. NEVER get on or off a moving machine. When mounting and dismounting, face the machine and use the handholds, track frame and track shoes. Do not hold any control levers when getting on of off the machine. Maintain three-point contact to be sure that you do not fall from the machine. Repair any damaged handhold, and tighten any loose bolts. Handholds, track frame and track shoes must be free of oil, grease and excessive dirt. l-3