SAFETY AVOID POWER LINES Serious injury or death can result if the machine or front at- tachments are not kept a safe distance from electric lines. • When operating near an electric line, NEVER move any part of the machine or load closer than 3 m plus twice the line insulator length. • Check and comply with any local regulations that may ap- ply. • Wet ground will expand the area that could cause any person on it to be affected by electric shock. Keep all by- standers or co-workers away from the site. SA-381 029-E01A-0381 PRECAUTIONS FOR LIGHTENING The machine is vulnerable to lighting strikes.
• In the event of an electrical storm, immediately stop opera- tion, and lower the bucket to the ground. Evacuate to a safe place far away from the machine. • After the electrical storm has passed, check all of the ma- chine safety devices for any failure. If any failed safety de- vices are found, operate the machine only after repairing them. SA-1088 OBJECT HANDLING If a lifted load should fall, any person nearby may be struck by the falling load or may be crushed underneath it, resulting in serious injury or death. • When using the machine for craning operations, be sure to comply with all local regulations. • Do not use damaged chains or frayed cables, sables, slings, or ropes.
• Before craning, position the upperstructure with the travel motors at the rear. • Move the load slowly and carefully. Never move it suddenly. • Keep all persons well away from the load. • Never move a load over a person's head. • Do not allow anyone to approach the load until it is safely and securely situated on supporting blocks or on the ground. • Never attach a sling or chain to the bucket teeth. They may come off, causing the load to fall. 032-E01A-0132 SA-014 S-18