MAINTENANCE 8.1 8.1 Preventative Maintenance Service Schedule 8 Note : For complete engine service details refer to Section 7 of this manual. If further information is required refer to the engine manufacturers service manual. 8-2 ITEM SERVICE REQUIRED 8 HOURS 50 HOURS 150 HOURS 300 HOURS 1000 HOURS ITEM SERVICE REQUIRED Engine Oil Check level. If necessary add 10W30 API Classification CF oil. Engine Oil Check level. If necessary add 10W30 API Classification CF oil. Radiator Check level and add if necessary. Fill with 50% mixture of ethylene glycol and water. Check cooling fins for dirt. If necessary blow out with compressed air. Check rubber seal around radiator baffle.
Hydraulic Oil Check level and add if necessary add 10W30 API Classification SJ (-20°C to 35°C) or 20W50 API Classification SJ (-10°C to 45°C) oil. Oil Cooler Check cooling fins for obstruction. Clean with compressed air or water. Air Cleaner Empty dust cap. Check condition indicator and service or replace element as required. Tires and Wheels Check for low pressure or tire damage. Inflate 10.00 x 16.5 to 40-45 PSI (276- 310 KPa). Check wheel nut torque 100-110 ft.lbs. (136-149 N.M.) Safety Equipment Check all safety equipment for proper operation and condition (seat belt, lift arm supports, seat bar, parking brake, quick-tach lock, shields, safety treads, front shield, cab side screens).
Repair or replace safety treads if necessary. Final Drive Check chain and sprocket condition. Check every 150 hrs. Decals Check for damaged or missing safety and instruction decals. See Section 8.5. Replace decals as required. Lubrication Grease all hinge pin fittings until excess shows. Engine Oil Replace engine oil. Use 10W30 API Classification CF oil. Initial change only. Engine Oil Filter Change engine oil filter element. Initial change only. Hydraulic Oil Change hydraulic oil filter elements. Initial change only. Muffler Check the muffler for carbon buildup and plugging. Clean if necessary. Check every 100 hours. Safety System Linkages And Springs Check and if necessary adjust.
Lubricate lock springs, shaft and linkage. 50 Hour Service Perform complete 50 hour service. Engine Oil Replace engine oil (initial change already made). Use 10W30 API Classification CF oil. Replace every 150 hours. Engine Oil Filter Replace engine oil filter. Replace every 150 hours. Hydraulic Oil Filter Replace hydraulic oil filter elements Preventative Maintenance Service Check It is recommended as a preventative maintenance that the 50 hour service be repeated every 150 hours after the initial 50 hour service.