TABLE OF OIL AND COOLANT QUANTITIES TABLE OF OIL AND COOLANT QUANTITIES IMPORTANT: (1) When the diesel oil sulphur content is less then 0.5%, change the engine oil according to the periodic maintenance intervals indicated in the operation and maintenance manual. In the diesel oil sulphur content exceeds 0.5% change the engine oil according to the following table: ASTM D975 N. (2) When starting the engine at temperatures below 0 °C, use engine oil SAE 10W, 20W-20 and 10W-30, even if during the day the temperature increases by 10 °C. (3) Use engine oil with CD classification; if oil with CD classification is used, reduce the engine oil change interval by a half.
(4) Use original products, which have characteristics specifically formulated and approved for the engine, the hydraulic circuit of equipment and for reductions. First filling quantity: total quantity of oil, including the oil for the components and pipes. Oil change quantity: quantity of oil necessary to fill the system or unit during the normal inspection and maintenance operations. ASTM: American Society of Testing and Materials SAE: Society of Automotive Engineers API:
American Petroleum Institute SK818-5 SK820-5 turbo 00-13 RESERVOIR KIND OF FLUID AMBIENT TEMPERATURE CAPACITY () -- 30 -- 20 -- 10 0 10 20 30 40 50°C Specified Refill Engine oil pan OIL • API CD 8 8 SAE 10 W S AE 30 SAE 40 SA E 10 W-30 SAE 5W-3 0 Hydraulic system and hydrostatic trasmissione OIL • API CD 39 27 SA E 10 W SAE 5W-3 0 Hydraulic circuit with biodegradable oil 39 27 Final transmission case (ea.) OIL • API CD 15,5 15,5 SAE 10W-3 0 Fuel tank DIESEL OIL 38 (SK818-5) 50 (SK820-5 turbo) – ✽ ASTM D97 5 N.2 Engine cooling system PERMANENT COOLANT 9 – Sulphur content Engine oil change interval from 0.5 to 1.0% 1/2 of regular interval over 1.0% 1/4 of regular interval