PRECAUTIONS DURING OPERATION SAFETY WARNING: For reasons of safety, always follow these safety precautions.. AFTER STARTING ENGINE CHECKS AFTER STARTING ENGINE Failure to carry out the checks properly after starting the engine will lead to delays in discovery of abnormalities, and this may lead to serious injury or damage to the machine. When carrying out the checks, use a wide area where there are no obstructions. Do not allow anyone near the machine. Check the operation of the gauges, work equipment and travel system. Check for any abnormality in the gauges, vibration, heat, smell, or sound of the machine. Check also that there is no leakage of oil, or fuel.
If any abnormality is found, carry out repairs immediately. If the machine is used when it is not in proper condition, it may lead to serious injury or damage to the machine. PRECAUTIONS WHEN STARTING OFF Check the direction of the track frame before operating the travel lever. When the sprocket (1) is at the front, the operation of the travel lever is reversed, so operate the machine carefully. Method of steering machine see “TRAVELLING” on page 123. 1 AA30706C Before moving the machine off, check again that there are no persons or obstacles in the surrounding area. When moving the machine off, sound the horn to warn people in the surrounding area.
Always sit in the operator’s seat when driving the machine. Fasten your seat belt (if installed) securely. The operator must not let any other person sit or stand any- where in the cab. Check that the travel alarm (option) works properly. Always close the door of the operator’s cab or check that the door is locked in position securely. AE305800 28