RAM 1500 — Child-Protection Door Lock System — Rear Doors

GETTING TO KNOW YOUR VEHICLE 29 NOTE: DO NOT grab the door handle when pushing the door handle lock button. This could unlock the door(s). The Passive Entry system will not operate if the key fob battery is depleted. A UTOMATIC D OOR L OCKS I F E QUIPPED The LED light on the key fob will not blink if the key fob battery is low or fully depleted, but a low key fob battery condition will still support the Passive Entry system function­ ality. When the key fob battery is low, the instrument cluster will display a message indicating that the key fob battery is low Ъ ­page­17. A UTOMATIC U NLOCK D OORS O N E XIT I F E QUIPPED The auto door lock feature default condition is enabled.

When enabled, the door locks will lock automatically when the vehicle's speed exceeds 15­mph (24­km/h). The auto door lock feature is enabled/disabled in the Uconnect Settings Ъ ­page­216. C HILD -P ROTECTION D OOR L OCK S YSTEM — R EAR D OORS 2 To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a Child-Protection Door Lock system. Do NOT Grab The Door Handle When Locking The doors will unlock automatically on vehicles with power door locks after the following sequence of actions: NOTE: 1. The Automatic Unlock Doors On Exit feature is enabled within the Uconnect system.

To use the system, open each rear door, use a flat blade screwdriver, and rotate the dial to the lock or unlock position. When the system on a door is engaged, that door can only be opened by using the outside door handle even if the inside door lock is in the unlocked position. After pushing the door handle button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle without the vehicle unlocking. 2. All doors are closed. 3. The gear selector was not in PARK, then is placed in PARK. 4. Any door is opened.

If Passive Entry is disabled using the Uconnect Settings, the key protection described in "Frequency Operated Button Integrated Key (FOBIK-Safe)" remains active/functional.