FOREWORD CE-conforming equipment Manufacturer-supplied CE-conforming equipment, according to documen t421-93-H1900 Manufacturer-supplied CE-conforming equipment, according to document 421-93-H1900 0. The responsibility for observing valid regulations in the case of wheel loaders with "interchangeable equipment" (e.g. bucket or fork-lift) which was not supplied from works lies with the cus- tomer which was subsequently fitted to the machine. The directives for CE conformity and road-traffic registration are deemed to have been fulfilled when the manufacturer of the equipment confirms fulfilment of the form 421-93-H1900 along- side.
The certification must be sent to the customer and the wheel loader manufacturer. The CE conformity declaration for a spe- cific wheel loader is only legally valid once this has taken place. The dimensions X1, X2, Y1 and Y2 must be provided by the customer for approval for use on public roads. (valid in Ger- many) The dimension Sh (smallest tyre radius) must be added to the dimension D2. The figure G (in kg) represents the maximum load (equipment and operating load) which may act upon this point. Y2 X2 X1 Y1 G A1 A2 Sh GK100395b 1-17 D2