Perkins — Perkins Industrial Engine Manual (EN)

General Information 8 UENR0623-02 the accessory drive gear the fuel injection pump gear The camshaft runs at half the rpm of the crankshaft. The fuel injection pump runs at one and a half times the speed as the crankshaft. The fuel injection pump that is installed on the left side of the engine is gear-driven from the timing case. The internal fuel transfer pump is driven by the fuel injection pump. The fuel transfer pump draws low-pressure fuel from the primary fuel filter. The fuel transfer pump delivers the fuel to the secondary filter. The fuel then travels to the fuel injection pump. The fuel injection pump increases the fuel to a maximum pressure of 160 MPa (23200 psi).

The fuel injection pump delivers the fuel to the fuel manifold (Rail). The fuel injection pump is not serviceable. The engine uses speed sensors and the Electronic Control Module (ECM) to control the engine speed. For the specifications of the 854E-E34TA, 854F- E34T, and 854F-E34Tengines, refer to the Specifications, “Engine Design”.