Operation—Operating the Machine Control Lever Pattern Operation CAUTION: Never place any part of body beyond window frame to avoid serious crushing injury from boom. Boom could lower if the control lever is accidentally bumped or otherwise engaged. Immediately replace a missing or broken window. T137500 –UN–25JAN01 Prevent injury from unexpected control lever function. Be aware of the control lever pattern used on the machine before operating. Excavator Control Lever Pattern NOTE: There is a Control Pattern Changer field option available that allows the excavator or backhoe control pattern to be selected.
Contact your dealer for an alternate method to change the control lever pattern if the field option is not used. Additional parts are required for the alternate method. T137498 –UN–25JAN01 The machine comes equipped from the factory with the excavator control lever pattern. A label with the excavator control lever pattern comes installed on the right cab window. Check the pattern on the label, and then carefully operate the machine to verify the pattern. Backhoe Control Lever Pattern Control levers return to neutral when released. Functions will stop and remain positioned, and the parking brake for swing and travel will engage.
1—Arm Out 2—Arm In 3—Swing Left 4—Swing Right 5—Boom Down 6—Boom Up 7—Bucket Load 8—Bucket Dump T137499 –UN–25JAN01 Boom, Arm, Bucket Movement DW90712,000003C –19–18JAN07–1/1 2-3-6 010609 PN=76