. SAFETY GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE SAFETY GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE Always face the machine and maintain at least three-point oil, grease, or mud on ground, set lock lever (1) to the lock position (L), and stop the engine. If the control levers are touched by mistake, the machine may suddenly move and cause serious personal injury or death. 2 - 18 hands and one f oot) with the hand rail and steps to ensure that you support yourself. steps them, wipe it off immediately.
In addition, repair any damage a nd tighten any loose bolts Do not grip th e control levers or lock lever when getting on or o ff the Never climb o n the engine hood or covers where there are no n on-slip Do not get on or off the machine while hol ding tools in your han NO JUMPING ON OR OFF MACHINE get on or off a moving machine. Never jump o n or off the machine. Never get on or off a moving If the machine starts to move when there is no operator on the machine, do not jump on to the machine and try to stop it. NO PEOPLE ON ATTACHMENTS Never let anyone ride on the work equipment or other attachments. There is a hazard of fallin g and suffering serious personal injury o r death.
PRECAUTIONS WHEN STANDING UP FROM OPERATOR'S SEAT Before standing up from the operator's s eat, such as when eiling window, when opening or clos ing the front window or c removing or inst alling the bottom window, or adjusting the position of ays lower the work equipm