11. EXPLANATION OF COMPONENTS 8. BLADE CONTROL LEVER (LIFT, TILT, PITCH) This lever is used to operate the blade lift, tilt, and pitch. RAISE HOLD: Blade is stopped and held in this position LOWER FLOAT: Blade will move freely according to external force. I AE077360 REMARK When the lever is at the FLOAT position, it will not return to the HOLD position when it is released, so it must be moved back by hand. @ @ LEFT TILT RIGHT TILT Left tilt AE077380 9. BLADE CONTROL LEVER (ANGLE) PAT machines only This lever is used to angle the blade. I LEFT ANGLE HOLD: Blade is stopped and held in this position RIGHT ANGLE 8 AE080040 2-l 1