Operation - Section 32 02/10 OM3237 Page 32-8 Operator Cab and Controls Statex III Download Port Statex III download port (13, Figure 32-6) is used by qualified personnel to access the STATEX III electric propulsion diagnostic information and data. Engine Diagnostic Port (CENSE) Engine diagnostic port (14, Figure 32-6) is used by qualified personnel to access the engine diagnostic information for the CENSE system. Refer to the engine manufacturer’s service publications for trou- bleshooting information. Engine Diagnostic Connectors Engine diagnostic connectors (17, Figure 32-6) are used by qualified personnel to access the engine Centry™ fuel control system diagnostic information.
The Centry system is optional. FIGURE 32-7. PAYLOAD METER 1. Payload Meter 2. Payload Meter Download Connector Passenger Seat PAYLOAD METER Passenger seat (16, Figure 32-6) is mounted on top of the right-hand portion of the center console. Payload meter (1, Figure 32-7) and payload meter download connector (2) are used to provide manage- ment with operational data, such as tonnage hauled and cycle times. The area beneath the passenger seat provides a cabinet for various 24VDC electrical components. Consult the service manual for service involving any of these components. Refer to Section 60, Payload Meter III, for a complete description of the payload meter and its functions.
Payload Meter Download Connector Payload meter download connector (2, Figure 32-7) is used with a special cable to allow payload meter (1) to communicate with a portable computer.