7. PRECAUTIONS DURING OPERATION WARNING: For reasons of safety, always follow these safety precautions. 7.2 AFTER STARTING ENGINE 1-10 CHECKS AFTER STARTING ENGINE Failure to carry out the checks properly after starting the engine will lead to delays in discovery of abnormalities, and this may lead to serious injury or damage to the machine. When carrying out the checks, use a wide area where there are no obstructions. Do not allow anyone near the machine. ‡ Check the operation of the gauges and equipment, and check the operation of the bucket, lift arm, brakes, travel system, and steering system.
‡ Checks for any abnormality in the sound of the machine, vibration, heat, smell, or gauges; check also that there is no leakage of air, oil, or fuel. ‡ If any abnormality is found, carry out repairs immediately. If the machine is used when it is not in proper condition, it may lead to serious injury or damage to the machine. ‡ Before traveling or starting operations, check that safety bar 1 is securely locked in the FREE position. PRECAUTIONS WHEN STARTING OFF ‡ Before starting off, check again that there is no one in the surrounding area and that there are no obstacles. ‡ When starting off, sound the horn as an alert. ‡ Always operate the machine only when seated in the operator’s seat.
‡ Always fasten the seat belt. ‡ An additional worker may ride in the machine only when sitting in the passenger seat. Do not allow anyone to ride on the machine body. ‡ Check that the backup alarm works properly.